Modify HoleKeyCreator / Modify / Solid Feature / Modify Hole
Use the Edit Hole feature to modify the parameters or location of pre-drilled hole. NOTE: This function is not guaranteed to recognize and/or edit partial holes (holes that do not contain a complete circle). Using the Function:
Dialog Options:Drill DiameterSpecify a value for the drill diameter. Blind DepthWhen checked, you can specify a value for the blind depth of the drill. Drill Point AngleWhen Blind Depth is selected (checked), you can specify a value for the drill point angle. CBore, CSink, CDrill, Ream, Drill, Tap, PipeFor each selection, you can specify a Fit, Standard, Diameter, and Depth. For Tap, you can specify type. For Pipe, you can specify Taper Angle and Pitch. A Fit/Screw Head field displays the fit for the CBore and Drill selections, or the Screw Head field for the CSink and CDrill selections. The Standard combo displays all of the sizes available for the current selection. When this value is changed, most other fields will update to match the database record for that size. MOVEUse this setting to move the selected hole to a new location. This option is disabled when multiple holes are selected. REMOVEUse this setting to remove the current hole. CREATE NEW HOLESUse this setting to create new holes using the parameters of the selected hole. You will be prompted to select a face into which the new hole will be drilled. MODIFY OTHER HOLESThis setting allows you modify other, additional holes. GET PARAMETERS FROM ANOTHER HOLEUse this setting to modify the current hole using the parameters of another hole. When this setting is chosen, you will be prompted to select the hole whose parameters will be used. |