Tools>Structural Shapes>Angle-Beam"> Tools>Structural Shapes>Angle-Beam">
KeyCreator Drafting / Mechanical / Beams / Angle Beam
Select Angles to access the dialog box. The angle you are creating will be displayed in the Preview section of the dialog box. Setup Dialog
StandardSets the Channel style and size or use the below options for custom setup. Vertical LegThe desired length of the vertical leg (units can be specified in the Setup tab of the dialog). Horizontal LegThis setting controls the desired length of the horizontal leg. ThicknessThis setting controls the overall thickness of the entire angle shape. Distance KTo determine the exact "K" value for a given shape, you should consult the AISC "Manual of Steel Construction." A general rule of thumb is that the "K" value is roughly double the flange thickness (+/- 25%). LengthInput a length for the Beam. RepChoose a Representation for the shape:
When complete choose OK or if you are editing an existing structural shape choose the Edit or move options Using this Function
After choosing setup dialog options the conversation bar position menu allows placement of the structural shape by anchor point. The anchor point for the structural shape can be changed using the generic toggle and placement of the structural shape can be altered using the Toggle Current Selection. Below the channel is placed in the top- middle of the front face using both generic toogle and Toggle Current selection (Display view=7, Cplane=6.) |