KeyCreator / Tools / Machinist / SpecialSpecial2XWireEDMThis special function provides the necessary tool path setup information for a 2 axis wire EDM SpecialThe Special Methods are available from the Tools>KeyMachinist>Special submenu. Pencil TraceUse the Pencil Trace feature to create a toolpath where the tool is tangent to two surfaces. Point MillUse the Point Mill feature to create either a spot drilling routine that recognizes the depth from a surface automatically, or used a predefined point set to create a plunge rough routine. GeometryUse the Geometry feature to create a machinable toolpath from geometry. |