Arc

Arc

The features available from the Create>Arc submenus can be used to create arc entities by several different methods.

Center and Radius

Use this feature to create an arc with specified start and end angles, a center position, and a radius.

Center and Diameter

Use this feature to create an arc with specified start and end angles, a center position, and a diameter.

Center and Edge Position

Use this feature to create an arc with specified start and end angles, a center position, and an edge position.

Three Positions

Use this feature to create an arc with three indicated circumference positions.

Tangent to Two Entities

Use this feature to create an arc with a specified radius and tangent to two selected entities.

Tangent to Three Entities

Use this feature to create an arc tangent to three selected coplanar entities.

Center and Tangent to Entity

Use this feature to create an arc tangent to a selected entity with its center at an indicated position.

Tangent to Entity and By End Position

Use this feature to create an arc tangent to the end position of an existing curve.

Start and End Position

Use this feature to create an arc with an indicated start position, end position, and included angle.

Radius and Two Positions

Use this feature to create an arc with an indicated radius, and start and end positions.

Offset at a Distance

Use this feature to create an arc (or circle) offset from a selected arc at a specified distance.

Offset through a Position

Use this feature to create an arc (or circle) offset from a selected arc through a specified position.