2ND Uni-Directional Rough with Up Only Z Dialog

This dialog appears when the OK button option is selected in the Uni-Directional Rough with Up Only Z dialog.

Since the below dialog is the same as Follow Surface 2nd dialog the respective Help Button will bring up this topic showing the below dialog.

Stock Limits

• Automatic – When checked, the software will determine heights for machining by verifying that all of the geometry is machined.

• User Specified – When checked, you will be prompted to indicate a zone in the Z-Axes to control the machining area.

Step Down By

• Distance – When checked, the step down will be created using a delta value for Z steps.

• Slice Count – When checked,  the software will divide the distance to be machined in Z by the number of slices.

Step Down Values

• Step Down – Specify the Delta value used to determine Z steps.

• Number of Slices – This is the number divided into the distance to machine to determine the Z steps.

Critical Z Levels

• No Intermediate Z-Levels – When checked,  the software will not factor flats into the tool path.

• Automatic Detection of Flat Areas – When checked,  the software will look for flat areas and produce Z levels at the part wall stock value above the plane.

• Prompt for Manual Selection – When checked, you will be prompted for specific Z levels requiring tool paths. The part wall stock value will offset the levels that are selected.