Rotate Toolpath

Use this feature to make multiple copies of a toolpath by rotating a copy of the original around a specified position.

Using the Function:

1. Click Tools>Machinist>Path> Rotate.

2. Select the toolpath(s) to rotate.

3. Enter the number of new copies to be made. Click ENTER.

4. Decide whether to join the copies into a single toolpath by selecting either YES or NO.

5. Enter the rotation angle. By default, the rotation angle is set to 90.

6. Indicate the position to rotate about. The copy(s) will be placed at this position at the reference angle you had specified.