Create Prism Dialog Options

KeyCreator Prime / Solid / Create / Primitive Solid / Prism / Create Prism Dialog Options

The following settings are contained within the Create Prism dialog.

Dialog Options:
KeyCreator Prime Solid Primative Prism Dialog

 

Create By

Choose the method by which the prism is to be created.

  • Dynamic - See Creating a Primitive Prism for details on using the DynaHandle to create the primitive.

  • Key In - Key in the dimensions of the base shape, the height of the prism, and the number of sides of the base shape.

    If the Elliptical checkbox is checked, both major and minor radii of the base shape must be supplied. If you wish to use a circular polygon as your base shape, toggle the Elliptical option off. Then supply the radius of the polygon in the Major Radius input box (the Minor Radius text box will dim). The n sided shape of the prism's base is inscribed inside a circle or ellipse of the given radii.

    After you click OK on the dialog box, the Position Menu appears, through which you are able to define the center of the base shape. Several copies of the prism can be created by continuing to define positions.

  • Two Points - Enter the major radius for the prism and the desired number of sides. After clicking OK, you will be prompted to choose two points to define the location and height of the prism.

Radius

Choose a radius option.

  • By Flats - When selected, the radius of the prism will be defined by flats.

  • By Corners - When selected, the radius will be defined by corners.

Parameters

Define the parameters by which the prism is to be created. Note that one or more of the following settings might be grayed out depending upon what Create By method you had selected.

  • Major Radius - Indicate a major radius for the prism.

  • Minor Radius - Indicate a minor radius for the prism. Before you can enter a minor radius value, you must first enable the setting by clicking on the checkbox beside it.

  • Height - Indicate a prism height value.

  • Number of Sides - Indicate the total number of sides to the prism.

Axis

The options in the Axis section determine how the axis for the height dimension of the prism is defined.

  • Use Cplane Z - The height dimension will be measured along the current construction plane z-axis.

  • Select - Using select will require that you define the axis by one of the following options: 2 Points, Line, Vector, Tangent, Prp2Pln, and Key In.