KeyCreator Prime / Solid / Sheetmetal / Sheetmetal Bend Relief
This function allows you to cut into a specified edge of a solid. . As shown below, the cut has a rounded edge, and protrudes into the solid at the specified depth and width. Using this Function:Cut OptionsChoose the option that best suits the bend relief. Width/DepthWill determine the size of the cut on the sheet metal part. The function accepts an input depth, width and a target edge on the Conversation Bar Specify full depth
Straight cut to edge plus specified depth:
EndChoose the depth end condition as either rounded or striaght.
Note: Use the Modify>Topology>Imprint /Scribe to create edges as needed for the cuts. |