Feature Control Frame Dialog Datum TabKeyCreator Drafting / Detail / Tolerance Symbol / Feature Control Frame / Feature Control Frame Dialog Datum Tabfeature Control Frame Dialog Datum TabUse the Datum page in the Create a New Feature Control Frame dialog box to create a datum on the Feature Control Frame. Through this page, you are able to specify Datum Text, Standard, Leader Type and other settings explained below. Using the Datum Attributes page, you can set attributes to be used for the datum Feature Control Frame symbols that you create. The settings contained in this page are identical to those in the Attributes page. Dialog Options:
Datum TextSpecify the text to be displayed in the datum. StandardThe Standard selected through the GeoTol will appear here, and cannot be changed unless through the GeoTol. If you intend to set a Standard through the Datum itself, independent of GeoTol, it is recommended that you use the Datum function, explained later in this Symbol segment. Miscellaneous OptionsThe settings for both the Use filled arrowheads on leaders and Return to dialog after placing symbol that were set through the GeoTol will appear here, and can only be changed through the GeoTol. Note that these settings are configurable separate of GeoTol through the Datum function. Leader TypeThe Leader Type set through the feature Control Frame will appear in this box, and can only be changed through the Feature Control Frame. If you intend to set a Leader Type through the Datum itself, it is recommended that you use the Datum function, explained later in this Symbol segment.
|