KeyCreator Drafting / Curve / Line / Offset / Parallel Position
Use this feature to create a line, parallel to an existing line, through a position that you specify.
-
In 2D construction mode, the line is created parallel to the projection of the reference line, and the line passes through the projection of the reference position.
-
In 3D construction mode, the parallel line is created in the plane formed by the reference line and the reference position.
Using the Function:
-
Select Parallel Position from the Curve>Line>Offset splter.
-
Select an existing line as the reference for creating a parallel line.
-
Indicate a reference position for the parallel line to pass through.
|